Sanitary Check Valves2019-07-06T04:01:57+00:00

Sanitary Check Valves

SIMPLE SV-3 series Sanitary Check Valves are also referred to the “non-return valves”. It is designed during piping installation process to prevent the back-flow. It comes in the form of 304 or 316L stainless steel check valve alongside a standard Ra 32 or a better finish in sanitary systems.

● Sanitary check valves are provided in sizes 1/2″ to 10″.
● Built with spring-loaded design.
● No dead space and crevices.
● Stainless steel construction.
● The FDA approved elastomer materials: EPDM, Silicone, Viton (FPM).
● Teflon (PTFE) seat available to choose from.

Hygienic Check Valve with Butt-weld Ends, Spring Check Valve

Reference: SV-3W
Sizes available: 1/2" to 4", DN15 to DN100
End connection: butt-welded / butt-welded

Sanitary Check Valve with Tri Clamp Ends, Spring Loaded

Reference: SV-3C
Sizes available: 1/2" to 4", DN15 to DN100
End connection: tri-clamp / tri-clamp

Sanitary Spring Check Valve with SMS thread Ends

Reference: SV-3T
Sizes available: 3/4" to 4", DN15 to DN100
End connection: threaded / threaded

Food Grade Check Valve, Union Type, Sanitary Design

Reference: SV-3U
Sizes available: 1" to 4", DN25 to DN100
End connection: union threaded / threaded

Inline Sanitary Check Valve, Sanitary 3-piece Check Valve

Reference: SV-3P
Sizes available: 1 1/2" to 8", DN40 to DN200
End connection: butt-welded or threaded

Tri Clover Check Valve with Teflon (PTFE) Seat, New Design

Reference: SV-317
Sizes available: 1" to 10", DN40 to DN250
End connection: butt-welded, sanitary clamp, threaded or others available upon request.