Manual Sanitary Tank Bottom Valve, Discharge Valve
Reference: SV-10MDS
Sizes available: 1 1/2" to 3" (DN40-DN80)
End connection: butt-welded, sanitary tri-clamp
Body & Disc: AISI 304 or 316L
Seat: EPDM, Viton (FPM), FDA
Max. working pressure: 145psi (10bar)
Temperature range: 14°F ~ 248°F (-10°C ~ 120°C)
Surface treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm), Ra 32µin as default
Operation: manual handle
INQUIRY
Sizes available: 1 1/2" to 3" (DN40-DN80)
End connection: butt-welded, sanitary tri-clamp
Body & Disc: AISI 304 or 316L
Seat: EPDM, Viton (FPM), FDA
Max. working pressure: 145psi (10bar)
Temperature range: 14°F ~ 248°F (-10°C ~ 120°C)
Surface treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm), Ra 32µin as default
Operation: manual handle
APPLICATION
SV-10MDS series is a Manual Sanitary Tank Bottom Valve, it is assembled at the bottom of tank, and widely used in dairy, food-processing, beverage, pharmaceutical and fine chemical industries. SV-10MDS operates manually, valve seat opens towards the inside of the tank, it avoids unexpected opening when the pipeline is over pressured.
TECHNICAL DATA
| Body Material | AISI 304 or 316L (1.4301 / 1.4404) |
| Seat Material | Silicone (default) |
| Seat Options | EPDM or Viton (FPM) |
| Max. Working Pressure | 145psi (10bar) |
| Working Temperature | EPDM: 14 ~ 248°F (-10 ~ 120°C) |
| Viton (FPM): -22 ~ 428°F (-30 ~ +220°C) | |
| Sterilization Temperature | 150°C (302°F), Max. 20 min |
| Internal Finish | Ra 16 ~ 32µin (0.4 ~ 0.8µm), Ra 32µin as default. |
| External Finish | Sand blast or mirror polish as request |
| End Connections | butt-welded, sanitary tri-clamp |
| Operation | manual handle |
DESIGN FEATURES
Design Features
● Hygienic design according to 3A standard
● Complete discharge system avoids retention
● Normally closed (NC) as the default, the NC and NO function are interchangeable by rotating 180° of the cylinder.
● 360° adjustable body, even after welding to tank
● Open lantern for visual inspection of shaft sealing
● Easy assembly/disassembly by loosening clamp in middle of the valve body
Operations
● Manual operation
● Steam barrier (if shaft sterilisation is required)
● C-TOP control unit
● Connections: DIN, SMS, RJT, IDF
● Double-acting pneumatic actuator
● External proximity sensor
● Internal surface finish: Ra 20μin (0.5μm)
